Why am I unable to access QVR Pro video streams via HTTP or RTSP share links from outside the network?


To access video streams via HTTP or RTSP share links, your network settings must be correctly configured.
If the NAS is behind a router, you need to forward a port on your router for the HTTP or RTSP service. Afterwards, you should be able to access video streams via HTTP or RTSP share links.

Comments

Post a Comment

Google

30 days - Popular Posts

QNAP Responds to Vulnerability Reports in Hikvision Cameras and Provides Recommendations to QNAP QVR Pro and QVR Elite Users

Image
QNAP Responds to Vulnerability Reports in Hikvision Cameras and Provides Recommendations to QNAP QVR Pro and QVR Elite Users Taipei, Taiwan, September 2, 2022 – After a thorough investigation and verification process, QNAP® Systems, Inc. (QNAP) today addressed vulnerability CVE-2021-36260 of Hikvision cameras and provides the following recommendations to QVR Pro and QVR Elite users who may be potentially affected. According to the security advisory by Hikvision , if these cameras are installed in the same LAN network, and this network cannot be accessed externally, attackers will NOT be able to exploit this vulnerability. Although this vulnerability does not directly influence QNAP surveillance products, it is highly recommended to update the firmware of the cameras listed in the advisory to reduce the possibility of being exposed to potential risks. These risks include, but is not limited to, failure to record from cameras that stop working, or receiving forged data from cameras. For...
Read more

Response to Qlocker Ransomware Attacks: Take Actions to Secure QNAP NAS

Image
2021-04-22 Response to Qlocker Ransomware Attacks: Take Actions to Secure QNAP NAS Taipei, Taiwan, April 22, 2021 – QNAP® Systems, Inc. (QNAP), a leading computing, networking and storage solution innovator, today issued a statement in response to recent user reports and media coverage that two types of ransomware (Qlocker and eCh0raix) are targeting QNAP NAS and encrypting users’ data for ransom. QNAP strongly urges that all users immediately install the latest Malware Remover version and run a malware scan on QNAP NAS. The Multimedia Console, Media Streaming Add-on, and Hybrid Backup Sync apps need to be updated to the latest available version as well to further secure QNAP NAS from ransomware attacks. QNAP is urgently working on a solution to remove malware from infected devices. QNAP has released an updated version of Malware Remover for operating systems such as QTS and QuTS hero to address the ransomware attack. If user data is encrypted or being encrypted, the NAS must not be s...
Read more

QVR Pro surveillance solution｜QNAP 2019 Computex

Image
Watch on YouTube here: QVR Pro surveillance solution｜QNAP 2019 Computex more information: QNAP QVR Pro  https://www.qnap.com/solution/qvr-pro-official/en/ QVR Pro tutorial   https://www.qnap.com/en/how-to/tutorial/qvr-pro QVR Pro FAQ   https://www.qnap.com/en/how-to/faq/qvr-pro Select a Suitable NAS for QVR Pro Deployment  https://www.qnap.com/en/qvr-nas-selector QVR Pro Camera Compatibility List  https://www.qnap.com/en/compatibility-qvr-pro QVR Pro Forum:  https://forum.qnap.com/viewforum.php?f=187
Read more

Why do time delays occur when QVR Pro Client switches between views in the sequential mode? Surveillance - QVR Pro

Applied models: All NAS Series Depending on your CPU usage, network bandwidth, video resolutions, and the number of camera channels, time delays may occur to different degrees when QVR Pro Client switches between views in the sequential mode. more information: QNAP QVR Pro  https://www.qnap.com/solution/qvr-pro-official/en/ QVR Pro tutorial   https://www.qnap.com/en/how-to/tutorial/qvr-pro QVR Pro FAQ   https://www.qnap.com/en/how-to/faq/qvr-pro Select a Suitable NAS for QVR Pro Deployment  https://www.qnap.com/en/qvr-nas-selector QVR Pro Camera Compatibility List  https://www.qnap.com/en/compatibility-qvr-pro QVR Pro Forum:  https://forum.qnap.com/viewforum.php?f=187
Read more

VIVOTEK allies with Soyal Technology to Enhance the Access Control and IP Surveillance Solution

Image
VIVOTEK has been allied with multiple leading industrial partners to provide highly-integrated surveillance solutions. Partnering with Soyal Technology, one of the most prestigious leading access control manufacturers in Taiwan, VIVOTEK launches the integrated access control and IP surveillance solution. With solid in-depth market experiences from Soyal Technology, the new solution allows users to seamlessly integrate the existing system, easily manage the solution and get all service ready in one step. Through the new solution, users are able to cut down the time and budget required for system integration. This new integrated solution can also be adopted in various fields at once and establishes a considerably higher security level in a smarter way. With facial recognition and video tagging, the new solution can accurately verify people in and out and then subsequently track where visitors go once they have entered. Further, security staff can easily manage both IP surveillance and a...
Read more

QNAP Introduces New NVR Network Surveillance Servers- QVP-85B and QVP-63B with 12th Gen Intel® Core™ Processors for SMBs and SOHOs

Image
Cost-optimized, easy-to-use and expandable; supports over 6,700 cameras from over 190 brands and ONVIF standards. Taipei, Taiwan, April 12, 2023 - QNAP® Systems, Inc., a leading computing, networking, and storage solution innovator, today launched new NVR Network Surveillance Servers – the QVP-85B with eight 3.5-inch SATA drive bays and Intel® Core™ i5 6-core processor, and the QVP-63B with six 3.5-inch SATA drive bays and Intel® Core™ i3 quad-core processor. The QVP-85B and QVP-63B run QVR Pro surveillance software supporting eight free IP camera channels. Offering an economic and high-performance software and hardware integrated video surveillance solution, the QVP-85B and QVP-63B fulfill requirements for secure, reliable and centrally-managed video surveillance storage for small businesses and offices. “The QVP-85B and QVP-63B provide an easy-to-use UI for convenient surveillance management and is widely compatible with up to 95% of IP cameras on the market,” said Andy Chuang, Pr...
Read more

QVR Pro 1.3.0.0 ( 2019/09/16 )

QVR Pro 1.3.0.0 ( 2019/09/16 ) [Important Notes] - QVR Pro 1.3.0 checks the RAID configuration of recording storage during the initial setup. The minimum required RAID level is RAID 1. If only one SSD is used as the system volume, the initial setup cannot be completed.      [New Features] - Added support for creating recording backup tasks. - Added support for specifying the maximum duration of a single recording in Recording File Explorer.  - Added support for the capture mode in Camera Settings. - Added support for image rotation in Camera Settings. - QVR Pro now uses Recording File Explorer to access recordings by default. - Added support for audio recording for generic RTSP models. - Camera Package now provides version information and a user interface. - Added support for connecting to multiple analog cameras via a single ONVIF video encoder (video server). - Added support for code signing to QVR Pro and Camera Package. - S...
Read more

Top post

QVR Pro 1.3.0.0 ( 2019/09/16 )

QVR Pro 1.3.0.0 ( 2019/09/16 ) [Important Notes] - QVR Pro 1.3.0 checks the RAID configuration of recording storage during the initial setup. The minimum required RAID level is RAID 1. If only one SSD is used as the system volume, the initial setup cannot be completed.      [New Features] - Added support for creating recording backup tasks. - Added support for specifying the maximum duration of a single recording in Recording File Explorer.  - Added support for the capture mode in Camera Settings. - Added support for image rotation in Camera Settings. - QVR Pro now uses Recording File Explorer to access recordings by default. - Added support for audio recording for generic RTSP models. - Camera Package now provides version information and a user interface. - Added support for connecting to multiple analog cameras via a single ONVIF video encoder (video server). - Added support for code signing to QVR Pro and Camera Package. - S...
Read more

How to Export Recordings from QVR Pro Client

Image
How to Export Recordings from QVR Pro Client Open your  QVR Pro Client , then login with the  QVR Pro ’s IP address and the proper login credentials. Drag the camera that is recording your desired video segment into the main view.  Click on the  Export Recordings  icon.  We can select the export settings from this window. In this tutorial, we will export a 5-minute segment from our recording, so we will change  Duration  to  5 minutes  and leave the other settings as default. By checking  Advanced Settings , you can select the output format and other specifications. Finally, click on  Start  and your recording segment will be exported to the destination folder. more information: QNAP QVR Pro  https://www.qnap.com/solution/qvr-pro-official/en/ QVR Pro tutorial   https://www.qnap.com/en/how-to/tutorial/qvr-pro QVR Pro FAQ   https://www.qnap.com/en/how-to/faq/qvr-pro S...
Read more

How to Backup QVR Pro Recordings

Image
How to Backup QVR Pro Recordings Introduction If you use Recording Backup in QVR Pro Server.  you can Backup to other NAS and you can set up the Backup schedule When the destination space is full. you can select to Stop backup or delete the oldest recording data  Before you start ensure that you have selected “Use Recording File Explorer to access recordings” in recording File Explorer page ensure that you disable Recycle bin for the export folder ensure that the version is QVR Pro 1.3.0(or later)
Read more

How to use Qdewarp (Fisheye dewarping) at QVR Pro Client

Image
How to use Qdewarp (Fisheye dewarping) at QVR Pro Client tags:  QVR Pro Introduction QVR Pro supports most of the standard fisheye cameras available on the market, and features Qdewarp technology that converts distorted parts of the original images into proportional ratios. QVR Pro also provides industry-leading functions, including allowing a single fisheye camera’s image to be simultaneously viewed in nine channels from different angles and cross-platform hardware-accelerated decoding for fisheye camera images. QVR Pro ensures higher surveillance performance for greater security while providing deployment flexibility.
Read more